Anti - Corrosion Raised Office Flooring System Removable Recycled
HT Office Usage Building Flooring Wiring System Cabling System is
made of good quality cold-rolled steel sheet with foaming cement
fully filled. The borders of the panel are trimmed with corner-lock
holes. Trucking can be placed at any point without cutting floor,
much easier for inspecting and repairing. Strong current and weak
current can be separated, suitable for all kinds of wires and plug
OA intelligent office building, OA classrooms or places need to be
raised, dust-free or waterproof rooms, usually used with square
- Fireproof class A, moistureproof, dustproof, corrosion prevention
- Convenient for arrange wiring system cabling system
- Avoid the disadvantage that wire which is pre-buried can be aged or
- High recycled, convenient removing, cost saving, long service life
|Type||Size||Uniform load||Concentrated load||Rolling load||Ultimate load|
Standard Type Single Wire Type
Dual Wire Type
Benefits of Raised Floor
Integrated raised floor for telecommunication, power and air
distribution offer several economic and environmental benefits.
- Ease of reconfiguration, and easy access
The integrated raised floor system is engineered to permit fast,
easy installation and quick wire and cable changes, enhancing the
ability to reconfigure the offices without disrupting power, voice
and data services, as well as the air distribution system.Variable
Air Volume (VAV) Terminals can be easily added, removed or
rearranged to respond to changes in occupancy or heating and
cooling loads. Even in workplaces with very low churn rates,
constantly evolving technologies in the communications and
networking sectors may demand occasional updating of the cabling
and wiring systems. These updates are quite simple with raised
The use of an raised floor plenum for conditional air distribution
can significantly reduce energy use in many possible ways, such as
a reduced fan power requirement. The underfloor supply plenum with
the large cross-sectional flow areas can supply air with very low
overall pressure drops.
It also provides higher chiller efficiency. Underfloor systems can
use warmer supply air, which permits a warmer cooling coil and
warmer evaporator temperature in dry climates.
In mild climates, the use of warmer supply air significantly
expands the opportunity to use free cooling or the direct use of
outside air, without operating a chiller.
Also, since the airflow is from floor to ceiling, most of the heat
generated from ceiling-mounted lights is removed before it can
enter the occupied zone. The cooling load is therefore reduced,
allowing warmer air to condition the space.
In turn, the concrete slab becomes an active thermal mass, thus
reducing temperature swings and peak coolingm requirements, and
permitting the realisation of benefits such as night precooling in
underfloor air applications.
GET YOUR FREE SAMPLE NOW!!!